The complete set of supports makes installation on flat roofs just simple. This aesthetic result proves the superiority of the Eurostar Fino design achieving a maximum height of 1,00m.

1. EUROSTAR’s tank has a mild steel external casing, with high temperature oven coating for maximum protection from rain, sun and sea air, ensuring durability and an elegant appearance.
2. FREON FREE polyurethane insulation is casted under pressure in the tank, surrounding the cylinder and maintaining hot water for up to 48 hours. The EUROSTAR is the ECO-FRIENDLY thermosiphon solar water heater completely made from material that can be recycled. SOLE’s respect for the environment starts at the production stage.
3. Closed circuit double jacket is made of 2.0 mm of mild steel. The large area where heat is exchanged makes the EUROSTAR an instant solar water heater. At the same time this protects the product from corrosion, scale and frost. Due to its design the EUROSTAR is operating in very hot climates, extremely cold areas with temperatures below zero or even in areas with poor water quality. In any case it will be as efficient and reliable.
4. The tank is made of 3 mm low carbon steel with a double “enamelling” coating (glass), oven-treated at 860C. EUROSTAR solar water heaters can withstand water pressure of up to 3,000 Kpa (30At or 440psi), ensuring a trouble free operation for many years.
5. The pure magnesium anode effectively protects the cylinder from electrolysis. EUROSTAR solar water heaters will never experience internal corrosion of the cylinder.
6. Very cloudy days are no problem for the EUROSTAR. Plenty of hot water thanks to the backup electric heater.
7. The thermostat with thermal cut out safety feature regulates the desired temperature of the hot water, with precision.

1. The Eurostar Fino solar panel (collector) casing is made of specially designed extruded aluminium profile powder coated, without any external connections, screws, nuts or rivets. It has a special slot for the rubber sealing making it 100% watertight. At the same time the powerful support system will resist any weather conditions even typhoons.
2. The rockwool 40mm (50kg/m3) insulation of the solar panel (collector) will maintain very high temperatures, which along with the other technical characteristics, achieve an incredible high efficiency.
3. The absorber is composed of a full face copper sheet with blue super selective titanium coating of 0.20mm thickness (selective or non-selective aluminum absorbers are also available) and is welded to the copper pipes by ultrasonic or laser welding.
4. The primary heliothermic liquid developed by SOLE achieves maximum transfer of heat to the water in the tank and at the same time protects the collector from scaling, rusting, freezing and overheating. The Eurostar Fino “heliothermic liquid” will last for a lifetime without needing to be replaced.
5. The solar panel’s glazing is 4 mm low iron solar prismatic tempered glass and ensures maximum penetration of irradiation. It is oven-treated at 700 ºC, achieving maximum strength and durability.
6. A special EPDM rubber profile ensures 100% water and vapor sealing. The rubber profile is covered by an aluminium profile on the top and sides of the solar water heater collector, protecting it from damage during transportation, stocking or installation.
7. Special blind rivet nuts on the back of the aluminium profile allows easy installation